1. The dynamic balancing machine needs to be maintained by a dedicated person to keep it clean. The guide rails should be regularly coated with oil to prevent rust, kept clean, and regularly maintained.

2. The surface of the support block or roller of the balancing machine should be kept clean, and iron shavings, dust, and debris should not be adhered. Before each operation, the support block or roller and rotor journal should be cleaned, and a little lubricating oil should be added. When moving the support frame, the rotor should be rotated simultaneously or the left and right support frames should be moved at the same speed to avoid scratches and wear on the surface of the shaft neck and rollers. Do not place the rotor on the roller frame for tapping or impact.

The electric measuring box of the dynamic balancing machine is a key component of the balancing machine, which must be protected from vibration and moisture and properly stored. After completing the work, the switch of the electrical measuring box should be turned off. If the electric measuring box is not used for a long period of time, it should be regularly powered on and preheated for a few hours. All knobs and switches on the panel of the electrical measurement box must not be moved arbitrarily to avoid damaging components and causing measurement errors.

4. The lens glass of the balancing machine's photoelectric head should be regularly wiped clean with lens wiping paper or cloth to keep it clean. Do not use oily gauze or dirty cloth to wipe the mirror surface.

5. The dynamic balancing machine equipment is a precision testing equipment that needs to be operated and stored by a dedicated person.