Daily maintenance of dynamic balancing machine
1. The dynamic balancing machine needs to be maintained by a dedicated person to keep it clean. The guide rails should be regularly coated with oil for rust prevention, kept clean, and regularly maintained.
2. The surface of the balancing machine support block or roller should be kept clean and free from iron filings, dust, and debris. Before each operation, the support block or roller and rotor journal should be cleaned and a small amount of lubricating oil should be added. When moving the support frame, the rotor should be rotated simultaneously or the left and right support frames should be moved at the same speed to avoid scratches on the shaft neck and roller surface, which may cause wear. Do not place the rotor on the roller frame for tapping or impact.
3. The electrical measuring box of the dynamic balancing machine is a key component of the balancing machine, which must be protected from vibration and moisture, and properly stored. After the work is completed, the switch of the electrical measuring box should be turned off. If the electrical measuring box is not used for a long period of time, it should be regularly powered on and preheated for a few hours. All knobs and switches on the panel of the electrical measuring box must not be arbitrarily turned to avoid damaging components and causing measurement errors.
4. The lens glass of the balance machine photoelectric head should be regularly wiped clean with lens wiping paper or cloth to keep it clean. Avoid using oil contaminated yarn or dirty cloth to wipe the mirror surface.
5. The dynamic balancing machine equipment is a precision testing device that requires a dedicated person to operate and store it.
1. The dynamic balancing machine needs to be maintained by a dedicated person to keep it clean. The guide rails should be regularly coated with oil for rust prevention, kept clean, and regularly maintained.
2. The surface of the balancing machine support block or roller should be kept clean and free from iron filings, dust, and debris. Before each operation, the support block or roller and rotor journal should be cleaned and a small amount of lubricating oil should be added. When moving the support frame, the rotor should be rotated simultaneously or the left and right support frames should be moved at the same speed to avoid scratches on the shaft neck and roller surface, which may cause wear. Do not place the rotor on the roller frame for tapping or impact.
3. The electrical measuring box of the dynamic balancing machine is a key component of the balancing machine, which must be protected from vibration and moisture, and properly stored. After the work is completed, the switch of the electrical measuring box should be turned off. If the electrical measuring box is not used for a long period of time, it should be regularly powered on and preheated for a few hours. All knobs and switches on the panel of the electrical measuring box must not be arbitrarily turned to avoid damaging components and causing measurement errors.
4. The lens glass of the balance machine photoelectric head should be regularly wiped clean with lens wiping paper or cloth to keep it clean. Avoid using oil contaminated yarn or dirty cloth to wipe the mirror surface.
5. The dynamic balancing machine equipment is a precision testing device that requires a dedicated person to operate and store it.
2 browse