At present, with the application of microcomputer technology, balancing machines have entered a new era, with significant improvements in performance, accuracy, and operability. And it has been increasingly widely used in fields such as electric tools, mechanical manufacturing, fans, motors, papermaking, textiles, household appliances, metallurgy, etc. Dynamic balancing machines, like other mechanical products, cannot be properly maintained and maintained on a daily basis, which will accelerate wear and shorten their service life. Therefore, in order to save more costs, we need to pay attention to the maintenance and upkeep of dynamic balancing machines.
Always keep the balance machine clean, and the guide rail surface should be kept clean and coated with oil to prevent rust. The surface of the support block or roller should be kept clean, and no iron filings, dust or debris should be adhered. Before each work, the support block or roller and the rotor journal should be wiped clean, and a little lubricating oil should be added. When moving the support frame, the rotor should be rotated simultaneously or the left and right support frames should be moved at the same speed to avoid scratches and wear on the surface of the journal and roller. It is not allowed to place the rotor on the roller frame for knocking or impact.
The lens glass of the photoelectric head of the dynamic balancing machine should be regularly wiped clean with lens wiping paper or cloth to keep it clean. Do not use oily gauze or dirty cloth to wipe the mirror surface. Balancing machines are precision testing equipment that should be managed and operated by dedicated personnel. So what should be done well during the use of the balancing machine to make its service life longer? Below, Huake Zhichuang Dynamic Balancing Machine will be popularized in detail for everyone.
1. Keep the surface of the support connection part clean, carefully inspect the waist before work, add oil, and maintain good lubrication during work.
2. All parts of the swing frame have been adjusted before leaving the factory, and do not disassemble them randomly during use.
3. Before using each shift, add an appropriate amount of No. 30 engine oil to the lubrication area. Each butter should be cleaned and replaced once a year under a one shift system.
4. The locking mechanism should be able to reliably lock the swing frame. When released, it should completely leave the swing part. The swing frame should only be released during measurement, and should be locked at all other times. Locking should not cause the wheel frame to move.
5. During non working hours, it is not advisable to place the balanced parts on the rack for a long time.
6. The electrical box should be kept clean to prevent moisture.
7. If any abnormalities are found during the use of this machine that cannot be handled, the power should be cut off in a timely manner and the maintenance team should be notified.
Always keep the balance machine clean, and the guide rail surface should be kept clean and coated with oil to prevent rust. The surface of the support block or roller should be kept clean, and no iron filings, dust or debris should be adhered. Before each work, the support block or roller and the rotor journal should be wiped clean, and a little lubricating oil should be added. When moving the support frame, the rotor should be rotated simultaneously or the left and right support frames should be moved at the same speed to avoid scratches and wear on the surface of the journal and roller. It is not allowed to place the rotor on the roller frame for knocking or impact.
The lens glass of the photoelectric head of the dynamic balancing machine should be regularly wiped clean with lens wiping paper or cloth to keep it clean. Do not use oily gauze or dirty cloth to wipe the mirror surface. Balancing machines are precision testing equipment that should be managed and operated by dedicated personnel. So what should be done well during the use of the balancing machine to make its service life longer? Below, Huake Zhichuang Dynamic Balancing Machine will be popularized in detail for everyone.
1. Keep the surface of the support connection part clean, carefully inspect the waist before work, add oil, and maintain good lubrication during work.
2. All parts of the swing frame have been adjusted before leaving the factory, and do not disassemble them randomly during use.
3. Before using each shift, add an appropriate amount of No. 30 engine oil to the lubrication area. Each butter should be cleaned and replaced once a year under a one shift system.
4. The locking mechanism should be able to reliably lock the swing frame. When released, it should completely leave the swing part. The swing frame should only be released during measurement, and should be locked at all other times. Locking should not cause the wheel frame to move.
5. During non working hours, it is not advisable to place the balanced parts on the rack for a long time.
6. The electrical box should be kept clean to prevent moisture.
7. If any abnormalities are found during the use of this machine that cannot be handled, the power should be cut off in a timely manner and the maintenance team should be notified.
150 browse